- We recommend
that you engrave a sample of the logo and make a backup of the logo
when you receive it.
- To copy a logo
on to drive C, place the logo disk in drive A. From the C prompt (C>),
type in Copy A:Logoname.xlg C:\xfiles\xlg
and press enter.
- One of your normal
fonts has to be installed before a logo can be selected into your
system.
- Select the letter
height you want to engrave the logo.
- Select the "L"
option for the logo box.
- The directory
line should read "C:\xfiles\xlg\*.xlg" If it does, press enter. If
the line is different, move the arrow cursor, type it in correctly,
and press enter. The computer will read all the files in the XLG directory
and display all logos in the logo window. The logos are displayed
9 at a time. To view all the logos available, move the arrows on the
right of the logo window with the cursor. (see sections 3-8 &
3-9 in your manual)
- From the logo
window, use the arrow cursor to select and okay the logo you want
to engrave.
- Use your cursor
to draw a box in the approximate location you want your logo. Your
logo will appear. Use the controls on the left side of your screen
to adjust height and baseline.
|