H-Square/Meistergram

VERSIONS D1.2 and D1.3

    1. We recommend that you engrave a sample of the logo when you receive it.
    2. If you have two floppy drives, put the logo disk in drive B; otherwise, put the logo disk in drive A. If you have a hard drive, copy the logo to the hard drive (drive C).
    3. From the main menu select #1 Layout.
    4. Set up your layout as you normally would.
    5. Select the text prompt on the line you want to engrave the logo. Type in the name of the logo like this @#LOGONAMELOG@#
    6. You do not have to change the font style, as the computer ignores this.
    7. Engrave the logo as you normally would.
VERSION D1.4
    1. We recommend that you engrave a sample of the logo when you receive it.
    2. If you have two floppy drives, put the logo disk in drive B; otherwise, put the logo disk in drive A. If you have a hard drive, copy the logo to the hard drive (drive C) into the logo subdirectory (e.g. C:\ENGRAVE\LOGOS). (Note: The extension for the logo should be LOG; for example, TEST.LOG.)
    3. From the main menu select #1 layout (by Screen) or #2 layout (by Line).
    4. Set up your layout as you normally would.
    5. Select the text prompt on the line you want to engrave the logo. Type in the name of the logo like this LOGONAME.LOG and type in @# for the font style.
    6. Engrave the logo as you normally would.
VERSION D1.4V2 & D1.4V3 *

    1. We recommend that you engrave a sample of the logo when you receive it.
    2. If you have two floppy drives, put the logo disk in drive B; otherwise, put the logo disk in drive A. If you have a hard drive, copy the logo to the hard drive (drive C) into the logo subdirectory (e.g. C:\ENGRAVE\LOGOS). (Note: The extension for the logo should be LGO; for example, TEST.LGO.)
    3. From the main menu select #1 Layout (by Screen) or #2 Layout (by Line).
    4. Set up your layout as you normally would.
    5. Select the text prompt on the line you want to engrave the logo. Type in the name of the logo like this LOGONAME and type in @# for the font style.
    6. Engrave the logo as you normally would.


    * For a Font - copy it to the hard drive by typing in

    Copy A: Fontname.fon C:\engrave\fonts

    (where Fontname = the name of the font on the disk)
 
Lamro Logos
526 N. Horne
Mesa, AZ 85203		 voice.. 480-292-9155
tollfree 866-623-9754
FAX... 480-964-4371